Electro-Voice R300-E (Band C)

All EV R300 Microphone Systems Come with a Free Mic Case

EV R300 WITH "EZsync" AND EV'S "ClearScan" TECHNOLOGY!
There are no other wireless microphones on the market made by any other manufacturer's that have EZsync and ClearScan. These two features make syncing the transmitter and receiver extremely easy and channel is scanning is not only a simple one touch feature...it also will find you the absolute BEST channel available in your area. No other lines have this feature. Every other wireless mic (outside of the EV line) will find you the first available channel. This will find you the BEST channel! There is a big difference. Highly Recommended by KPODJ!

Product Highlights
Frequency Set C
BP300 Bodypack Transmitter
TA4 Bodypack Input Connection
HM3 Headworn Microphone
32 Preset Channels
ClearScan Channel Selection
EZsync Remote Channel Syncing
Rugged Metal Construction
The Electro-Voice R300-E Headworn Wireless Microphone System is a cost-effective microphone system well suited for instructors, singers, houses-of-worship, audio for video, DJs and other applications. The R300-E includes the R300 true-antenna diversity receiver, BP300 bodypack transmitter and HM3 headworn microphone. The system features 32 user selectable frequency channels and diversity reception for minimizing RF interference.

The ClearScan feature provides single-touch frequency scanning for effortless searches of ideal operating frequencies. Easily keep the transmitter and receiver in sync with the EZsync infrared channel transfer feature. The R300 receiver features 1/4" phone and XLR outputs on the rear and the BP300 bodypack operates for up to 14 hours on a pair of AA alkaline batteries.

Designed for club sound, performance & sports venues, and other applications

ClearScan - find the clearest channel available with the touch of one button

EZsync - infrared channel transfer from receiver to transmitter for easy and error-free setup

14 hour battery life from two AA alkaline batteries

Rugged metal transmitters with backlit LCD display and battery gauge

32 preset channels, with compatible groups of 8 channels for simultanious use

Bodypack with TA4 connector - compatible with all Electro-Voice lapel and head-worn microphones for easy upgrades

Detachable half-wave receiver TNC antennas allow for use with the APD4+ antenna distribution system

Metal receiver chassis with optional rack mount ears and front mount antenna cables

HM-3 Omnidirectional headworn for clear, constant vocals

System
Type of System UHF Headworn Microphone
Distortion Less than 1.0, 0.4 typical %
Dynamic Range Greater than 95dB
Overall Frequency Response 80Hz - 18kHz +/- 2dB
Signal-to-Noise Ratio Greater than 100dB
# Of Channels 32 Preset channels
RF Sensitivity Less than 1.0uV

Receiver
Type of Receiver R300
Type of Outputs 1/4 inch unbalanced, 3-pin XLR balanced
Headphone Monitoring No
Power Requirements 12VDC, 500mA Max
Diversity Circuitry True Antenna
Display Back-Lit LCD
Antenna Type Diversity

Transmitter
Type of Transmitter BP300 Bodypack Transmitter
Type of Input Connector TA4 Connection
Type of Microphone HM3 Headworn
Polar Pattern Omnidirectional
RF Output 8mW
Battery Type/Approx. Life Two AA Alkaline, 14 hours
Mute Switch On/Off, Set, Up, Down, Sync